4-Chloro-3-Methylbenzeneboronic acid - Names and Identifiers
4-Chloro-3-Methylbenzeneboronic acid - Physico-chemical Properties
Molecular Formula | C7H8BClO2
|
Molar Mass | 170.4 |
Density | 1.26±0.1 g/cm3(Predicted) |
Melting Point | 238-242°C |
Boling Point | 317.5±52.0 °C(Predicted) |
Flash Point | 153.5°C |
Solubility | soluble in Methanol |
Vapor Presure | 6.81E-05mmHg at 25°C |
Appearance | powder to crystal |
Color | White to Almost white |
pKa | 8.44±0.10(Predicted) |
Storage Condition | under inert gas (nitrogen or Argon) at 2-8°C |
Refractive Index | 1.549 |
MDL | MFCD02683104 |
4-Chloro-3-Methylbenzeneboronic acid - Risk and Safety
Hazard Symbols | Xi - Irritant
|
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin.
R41 - Risk of serious damage to eyes
R37/38 - Irritating to respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S39 - Wear eye / face protection.
S37 - Wear suitable gloves.
|
HS Code | 29319000 |
Hazard Class | IRRITANT |
4-Chloro-3-Methylbenzeneboronic acid - Introduction
4-Chloro-M-Tolueneboronic acid is an organic compound with the chemical formula C7H7BClO2. The following is a description of its nature, use, formulation and safety information:
Nature:
-Appearance: 4-choro-m-tolueneboronic acid is usually a white solid.
-Melting point and boiling point: Its melting point is 84-86 ℃, and its boiling point is 320 ℃.
-Solubility: The solubility in water is low, but the solubility in some organic solvents (such as ethanol and methanol) is high.
Use:
- 4-Chloro-M-Tolueneboronic acid is commonly used as an intermediate in organic synthesis.
-It can be used to synthesize other organic compounds, such as drugs, pesticides, etc.
Method:
The preparation method of 4-Chloro-M-Tolueneboronic acid can be obtained by reacting Phenylboronic acid with methyl chloride. The specific preparation steps and reaction conditions may vary depending on the experimental conditions, so it is recommended to carry out in the laboratory.
Safety Information:
-4-choro-m-tolueneboronic acid is considered relatively safe under general conditions of use. However, as chemical substances, some safety measures still need to be taken:
-Avoid direct skin contact when touching, wear gloves and protective glasses if necessary.
-Seek immediate medical help if inhaled or ingested accidentally.
-When using or handling compounds, ensure adequate ventilation to avoid inhaling vapors or dust.
-In any case, refer to the relevant safety data sheets and operating instructions according to the specific usage and experimental conditions.
Last Update:2024-04-09 20:45:29